Process details
- Overview
- Measurement of feed water conditioning chemicals
- Strainer resistance measurement
- Level measurement of feed water treatement chemicals
- Flow measurement of make up water
- Level measurement in Ion exchanger
- Condenser level measurement
- Differential pressure measurement across Ion exchanger
- Strainer resistance measurement
- Conductivity measurement of polished condensate
- PH measurement of polished condensate
- Level measurement of chemical treatment tank
- Strainer resistance measurement
- Chlorine measurement for biocide dosing
- Temperature measurement of cooling water
- Level measurement of polished water tank
- Polished condensate flow measurement
- Flow measurement of pegging steam for deaerator
- Polished condensate flow measurement
- Pressure measurement of polished condensate
- Level measurement of bypass deaerator
- Deaerator pressure measurement
Balance of plant in combined cycle power plant
Instrumentation in BOP applications
The condenser is designed for receiving and safely condensing all steam flows, including steam flows from the steam bypasses and drains, where low temperatures and pressures maintain good efficiency in the Rankine process. The condensate is led to the condensate system.
Cooling Water SystemA raw water system supplies make-up water to the main cooling water system which circulates to meet all the steam condensing and auxiliary water requirements of the power plant.
Cooling TowerThe cooling towers are designed to cool the heated water to the required design temperature when the steam turbine is operating at full guaranteed output.
Auxiliary and Closed Cooling Water SystemsThese systems consist of an open cooling water circuit taking rejected heat via water/water cooled from a closed secondary cooling circuit. The coolant in the primary circuit is tapped off the main cooling water system.
Water Treatment SystemWater treatment systems control the water intake, water quality and re-generation. The prime function of the water treatment system is to achieve a treated water quality in accordance with VGB guidelines or equivalent internationally recognised standards/guidelines, to meet the steam turbine quality requirements.
Deaerator systemThe dissolved non-condensable gases normally present in the condensate cause many corrosion problems. The de-aeration and storage functions, combined here in one vessel, are designed to remove such non-condensable gases as oxygen and carbon dioxide from the plant condensate, and any supplementary make-up water, to achieve the quality required.
The condensate has low conductivity and can be measured by KROHNE OPTIBAR DP flowmeters or OPTISONC 3400 ultrasonic flowmeters. Many tank levels in the condensate system need to be monitored and controlled. This can be achieved using OPTIFLEX 7200/ 8200 guided Radar level meters directly integrated into the storage tanks or via BM26 bypass level gauges which can incorporate a variety of different technologies such as TDR, FMCW, MLI, REED or limit switches, even in redundant configurations.
Requirements
- Chemical resistance
Recommended products and solutions
Requirements
- Process control
Recommended products and solutions
Requirements
- Chemical resistance
Recommended products and solutions
Requirements
- Low conductivity
- Process control
Recommended products and solutions
Requirements
- Process control
Recommended products and solutions
Requirements
- Diaphram seals
- Chemical resistivity
- Vacuum service
Recommended products and solutions
Requirements
- Process control
- Diaphram seals
Recommended products and solutions
Requirements
- Process control
Recommended products and solutions
Requirements
- Low conductivity
- High temperature
Recommended products and solutions
Requirements
- Low conductivity
- High temperature
Recommended products and solutions
Requirements
- Chemical resistance
Recommended products and solutions
Requirements
- Process control
Recommended products and solutions
Requirements
- PH corrected chlorine measurement
- Low maintanance
Recommended products and solutions
Requirements
- Process control
Recommended products and solutions
Requirements
- Low conductivity
- No maintanance
Recommended products and solutions
Requirements
- Low conductivity
- Process control
Recommended products and solutions
Requirements
- Process control
Recommended products and solutions
Requirements
- Low conductivity
- Process control
Recommended products and solutions
Requirements
- Low conductivity
- Process control
Recommended products and solutions
Requirements
- Process control
Recommended products and solutions
Requirements
- Process control